2 raw and together 3,5 Gal Fat Bob gas tank halfs, ready for a gas cap with bayonet lock and for a powerfull 13/16" NPT mounting petcock at left side. Comes with two tubes to connect both sides. Typical for Harley-Davidson® Big Twins from 1967 to 1984. Will also fit models from 1936. Replace OEM 61218-67A, 61426-67A. Gascapset 14-0020 fits.

The Gas Tank half has the following size:
48 cm length x 20 cm width x 20 cm height

All gas tanks should be pressure tested and fitted before paiting.

  • STATE PRISON "Wassell"
  • narrow, small, round - egg style
  • sits low on top tube (large tunnel)
  • 1.6 gal. (approx. 6l) capacity
  • 2x 1/4 NPT fuel tap connection
  • screw-In fuel cap mount (H-D from '83)
  • free DOCK66 fuel canister (2l) with the purchase of every tank (as long as stock lasts)

 

Small, narrow and round STATE PRISON chopper tank called "Wassell" in egg style. Comes unpainted with screw-in gas cap for the perfect round shape. There are two ¼ inch fuel tap connections at the end of the tank for optimal use of the fuel capacity of about 1.6 gallons, which is an insane 6 Liters.

Ride on!

Tank dimensions: 37 cm length x 23 cm width x 21 cm height. Total length including the support lugs 42 cm. The recess to accommodate the frame tube is approx. 4,6 cm wide, approx. 17 cm at the front (approx. 19.5 cm at the end of the lug) and approx. 3 cm deep at the rear.

Note: it is recommended to pressure test, seal and test fit the tank before painting and installing the tank.

Nice and small Frisco style 2,4 Gal gas tank, universal mounting, ready for a gas cap with bayonet lock and for a 3/8" NPT mounting petcock. Two additional holes with 1/4" NPT for further applications.

The Gas Tank has the following size:
39 cm length x 23 cm width x 17 cm height
Complete length including the plates 44,5 cm
The tunnel to include the framework is 6 cm width, ca. 3 cm deep in front and rear (lowtunnel).

All gas tanks should be pressure tested and fitted before paiting.

Small, vented aluminum gas cap with a classic knurl and polished top made by Dock66. It comes with a steel bung for weld in. So it can be used for DIY gas tanks, modification of stock-, chopper- or custom tanks and oil tanks.

Build your own!

Dimensions:

Total height with steel bung: 37 mm

Dimensions gas cap:
Diameter: 40 mm

Dimensions steel bung:
Outer diameter at the top: 41 mm
Outside diameter below: 38 mm
Height: 25 mm
Installation depth: 18 mm
Inner diameter steel bung: 29 mm

1 well-priced chromed early vented gas cap with cam style bayonet lock for 36-73 H-D Sportster Tanks and Right Fat Bob Tank.

The length of the bayonet bracket is 4,8 cm. Diameter ca. 65 mm. Replaces OEM# 61103-36.

 

Nice and small 2,4 Gal Frisco Style gas tank, like original on Harley-Davidson Sportser models from 1955 - 1978 , ready for a gas cap with bayonet lock and for a 3/8" NPT mounting petcock. Replaces OEM #61006-63B.

The Gas Tank has the following size:
40 cm length x 23 cm width x 18 cm height
Complete lenght including the plates 44 cm
The tunnel opening to include the framework is 4,5 cm width, ca. 9 cm deep in front, ca. 1 cm deep in rear.

All gas tanks should be pressure tested and fitted before paiting.

 

  • STATE PRISON "Elipso"
  • narrow, small, round - teardrop style
  • sits high on top tube (low tunnel)
  • 1.6 gal. (approx. 6l) capacity
  • 2x 1/4 NPT fuel tap connection
  • screw-In fuel cap mount (H-D from '83)
  • free DOCK66 fuel canister (2l) with the purchase of every tank (as long as stock lasts)

 

Small, narrow and round STATE PRISON chopper tank called "Elipso" in teardrop style. Comes unpainted with screw-in gas cap for the perfect round shape. There are two ¼ inch fuel tap connections at the end of the tank for optimal use of the fuel capacity of about 1.6 gallons, which is an insane 6 Liters.

Ride on!

Tank dimensions: 41 cm length x 22 cm width x 20 cm height. Total length including the support lugs 46 cm. The recess to accommodate the frame tube is 6 cm wide, approx. 5 cm at the front (approx. 7 cm at the end of the lug) and approx. 3 cm deep at the rear.

Note: it is recommended to pressure test, seal and test fit the tank before painting and installing the tank.

  • Gas Tank Shell Sportster Style
  • Perfect for on-off builds and individual custom projects
  • Universal use: Without bottom and gas cap nozzle
  • For craftsmen: Welding skills required
  • maximum length 42 cm, opening at the bottom 38 cm, width 24 cm, height 20 cm


Gas tank shell in the shape of a Harley-Davidson® Sportster® gasoil tank. The Dock66 gas tank shell comes without bottom and gas cap nozzle, so it can be custom adopted to projects and all kinds of motorcycles - the customizer can choose the gas cap and petcock positions and build a custom tank bottom that suits their design and application.

The shell is XL style, with a over all length of 42 cm , opening at the bottom 38 cm, 24cm wide and can hold approximately 2.4 gallons - depending on the bottom shape chosen.

2 well-priced chromed early vented (right side) gas caps with cam style bayonet lock for 36-73 H-D Sportster Tanks and Fat Bob Tanks.

The length of the bayonet bracket is 4,2cm. Outer diameter 65 mm. OEM# 61103-36.